C-1700N Chem-Feed Duplex

The CHEM-FEED C1700N Duplex Head Metering Pumpfeatures two independently controlled pump heads.Because of the unique duplex headconfiguration, motor power is used tomaximum efficiency. This is of particularimportance for overcoming backpressure.Also, alternating strokes mean double theinjections per minute. For example, a 125RPM delivers 250 injections per minute,or four injections per second. This is of significance for applications requiring a pump approaching a constant, even feed rate, without broad spaces of time between injections.The C1700 N can be used to inject different amounts of like chemical into separate systems, feed two different chemicals into the same system(blend), or when a single head pump doesn’t provide quite enough output.

  • Peristaltic pump design does not have valves that can clog requiring maintenance.
  • Self priming – even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
  • Outputs to 25 ml/min (9.5 GPD).
  • Output pressures to 100 PSI.
  • Output volume is not effected by changes in back pressure.
  • Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
  • Two pump tubes supplied with each pump. No extra tubing required.
  • Easy to use dial knob output control.
  • Outputs as low as 1/3 second per minute.
  • Adjustable 60 second repeating interval timer. 0.3 – 6.0 second adjustable on time per 60 second cycle.
  • Built-in Tube Failure Detection system (TFD). Senses chemical in the pump head, shuts off the pump and activates an NPN open collector output.
  • Durable housing of chemical resistant Valox (PBT) thermoplastic.

Coming soon…
Coming soon…